Base

OEM PowerEdge R6615 Server

Chassis

2.5" Chassis with up to 10 Hot Plug Hard Drives

Motherboard

PowerEdge R6615 Motherboard

Processor

AMD 9254 2.9GHz 24C/48T (1)

Memory

32GB RDIMM, 5600MT/s, Dual Rank (4)

RAID/Internal Storage Controllers

PERC H755 SAS, Front

Hard Drive

BOSS-N1 controller card + with 2 M.2 960GB (RAID 1)

2.4TB Hard Drive SAS ISE 12Gbps 10K 512e (10)

Network Adapters

Broadcom 5720 Dual Port 1GbE LOM

Broadcom 57416 Dual Port 10GbE BASE-T Adapter, OCP NIC 3.0

Fans

Very High Performance Fan x4

Power Supply

Dual, Hot Plug, Redundant Power Supply (1+1), 1100W

Power Cords

C13 to C14, PDU Style, 12 AMP, 6.5 Feet (2m) Power Cord, North America

PCIe Riser

Riser Config 3, 2 x 16 FH

Embedded Systems Management

iDRAC9, Enterprise

Quick Sync

None

Rack Rails

ReadyRails Sliding Rails Without Cable Management Arm

PSU Specifications:

 PSU

 Class

 Heat Dissipation (Maximum)

 Frequency

 Voltage

 Current

 

1100W Mixed Mode

Titanium

4100 BTU/hr

50/60 Hz

100–240 V AC, autoranging

12 - 6.3 A

Temperature Specifications ASHRAE A2:

 Allowable continuous operations

 

 Temperature range for altitudes <= 900 m (<= 2953 ft)

10 to 35°C (50 to 95°F) with no direct sunlight on the platform

 Humidity percent range (non-condensing at all times)

8% RH with -12°C minimum dew point to 80% RH with 21°C (69.8°F) maximum dew point

 Operational altitude de-rating

Maximum temperature is reduced by 1°C/300 m (1.8°F/984 Ft) above 900 m (2953 Ft)

Temperature Specifications ASHRAE A3:

 Allowable continuous operations

 

 Temperature range for altitudes <= 900 m (<= 2953 ft)

5 to 40°C (41 to 104°F) with no direct sunlight on the equipment

 Humidity percent range (non-condensing at all times)

8% RH with -12°C minimum dew point to 85% RH with 24°C (75.2°F) maximum dew point

 Operational altitude de-rating

Maximum temperature is reduced by 1°C/175 m (1.8°F/574 Ft) above 900 m (2953 Ft)

Temperature Specifications ASHRAE A4:

 Allowable continuous operations

 

 Temperature range for altitudes <= 900 m (<= 2953 ft)

5 to 45°C (41 to 113°F) with no direct sunlight on the equipment

 Humidity percent range (non-condensing at all times)

8% RH with -12°C minimum dew point to 90% RH with 24°C (75.2°F) maximum dew point

 Operational altitude de-rating

Maximum temperature is reduced by 1°C/125 m (1.8°F/410 Ft) above 900 m (2953 Ft)

Common Environmental Specifications:

 

 Maximum temperature gradient (applies to both operation and non-operation)

20°C in an hour* (36°F in an hour) and 5°C in 15 minutes (9°F in 15 minutes), 5°C in an hour* (9°F in an hour) for tape hardware

 

NOTE:* - Per ASHRAE thermal guidelines for tape hardware, these are not instantaneous rates of temperature change.

 Non-operational temperature limits

-40 to 65°C (-40 to 149°F)

 Non-operational humidity limits

5% to 95% RH with 27°C (80.6°F) maximum dew point

 Maximum non-operational altitude

12,000 meters (39,370 feet)

 Maximum operational altitude

3,050 meters (10,006 feet)

Maximum Vibration Specifications:

 

 Operating

0.21 Grms at 5 Hz to 500 Hz for 10 minutes (all operation orientations)

 Storage

1.88 Grms at 10 Hz to 500 Hz for 15 minutes (all six sides tested)

Maximum Shock Pulse Specifications:

 

 Operating

Six consecutively executed shock pulses in the positive and negative x, y, and z axis of 6 G for up to 11 ms

 Storage

Six consecutively executed shock pulses in the positive and negative x, y, and z axis (one pulse on each side of the system) of 71 G for up to 2 ms